Note: this initial recommendation is being posted on 3/21 (Tuesday) and is subject to change pending weather updates.
For this race Adam will be on-hand with all the MNC wax, ready to test and help with classic wax. We can also apply a topcoat to skis on-site to ensure maximum speed! The following recommendations are for prep and race underlayers:
Glide for all skis
Begin with a layer of NF Blue/CH6 or other blue glide wax to harden the base. Scrape and brush.
Apply a layer of SkiGo XC or LF Graphite, or Toko NF or LF Black. Scrape and brush.
Apply the following paraffin depending on your brand preference:
Toko: 1:1 mix of HF Red and HF Yellow
Swix: HF8X
SkiGo: HF Orange
Holmenkol: Racing Mix Yellow
Substitute LF or NF (non fluoro) if applicable!
Classic skis
Thoroughly clean your kick zone, and have it clearly marked
Use 100-grit sandpaper, wrapped around a cork or other flat surface, and lightly abrade the kick zone in a tip-to-tail scrubbing pattern
Comments are closed.